5
POSITIONING
AND
FITTING
eCA120DN / eCA120HZDN is suitable for installation on a wall or under a surface
(table, shelf, cupboard, etc.), thanks to its design a
nd layout of its connectors, controls
and LED indicator lights. Along with the optional 1UHRMKIT accessory
(
not included
)
,
it is also possible to install the unit in a standard 19” rack
(1RU
height
)
.
This unit is intended for users with low technical expertise, for this reason, all input
gain controls are accessible by means of an adjustment turnscrew, except for the
output level adjustments, controlled with classic rotary knobs, easily accessible from
the front panel.
Thanks to its low consumption and heat dissipation the eCA120DN / eCA120HZDN
does not require forced cooling, however, it must be prevented from installing the unit
in dusty environments with extreme temperature and/or humidity conditions.
The unit must be away from noise
and interference sources (vo
ltage variators, electric
engines, etc.) as well as mains cables.
CONNECTING
The amplifier is powered by alternating current through its external power source: 100-
240 VAC and 50-60 Hz.
The atmosphere should be as dry and dust free as possible. Do not expose the unit to
rain or water splashes. Do not place liquid containers or incandescent objects like
candles on top of the unit.
Should any work or connection / disconnection task be done, always
disconnect the unit from the mains supply. There are no elements that can
be manipulated by the user inside the unit.
To avoid buzzing, do not allow the power cable to intertwine with the shielded cables
that transport the audio signal.
