Ecler DP400 User Manual Download Page 16 | Manualshive

Page: 16 / 24

Ecler DP400 User Manual Download Page 16

16

Installing the DP:lab2 software

The first step consists of installing the programme on the

computer that will serve as the programming platform. For this, you will
use the application file on the CD-ROM.

Execute this setup program to start the installation process by

double-clicking on the icon. Following screen welcomes the installation
process and invites you to continue.

Click on the Next > button. The following screen now asks you

for the application installation directory.

Once the path has been selected (in case the default path is not

used), press the Next > button so that the next screen appears.

Here, the position of the direct access icon for

DP:lab2

can be

chosen. Normally, the default position is a good choice. Pressing the
Next > button.

On this screen, you have the option to create direct access

links.

Immediately after the Next > button is clicked on this screen, the

copying process will begin.

After all files have been copied to the hard drive, the last screen

informs about the success of the installation process.

Press Finish to exit the installation.

«
...
14
15
16
17
18
...
»

Summary of Contents for DP400

























Reviews:

No comments