8
OUTPUTS
The eSAM402 has a main stereo output (
OUT L / OUT R
), with electronically balanced
Euroblock connectors.
Connection is made according to the following diagram:
The mixer's main output level (
OUTPUT VOL
) must be set in order to avoid your system
power amp clipping indicators (CLIP) to be permanently lit. Only the most powerful lower
frequencies must light them.
Other connections on the back panel:
•
AUX/REC output
with a nominal output of 0dBV (10k
load) and an extra gain
setting of +6dB, enabled by internal jumper (0dBV is the default position).
•
L+R switch
: convert output signals in a mono signal.
•
MUTE remote control input:
enabled by external dry contact closure. It allows
connection of fire detection systems and other safety devices that have to mute the
mixer by using this control signal. The mode of operation is "NO" (normally open).
