7
6.
CONNECTING
6.1. ePRS10Ti:
The power selection for 70/100V line is made by wiring the connection according
to the following colour code:
@100V
@70V
WHITE
10W
5W
GREEN
5W
2,5W
RED
2,5W
1,25W
BLACK
COM
COM
6.2. ePRS20Ti:
The power selection for 70/100V line is made by wiring the connection according
to the following colour code:
@100V
@70V
WHITE
20W
10W
GREEN
10W
5W
RED
5W
2,5W
BLACK
COM
COM
Note:
if the loudspeaker is used in 70V installations, the corresponding powers for
the 100V position will be reduced to half those indicated on the switch. To one
quarter for 50V installations.
WARNING!
If the system is accidentally connected with the switch in the 100 V/60
W position to a low-impedance amplifier, no damage will be caused to the
loudspeaker, but its performance will be well below its specifications.
7.
LOCATION AND INSTALLATION
In general, the following rules will be followed:
The unit must always be installed on firm, solid surfaces.
Ensure that the surface on which the loudspeaker is to be installed can
withstand its weight.
Always use a safety cable to secure the loudspeaker installation.
For good sound reproduction, there must not be any obstacles between the
loudspeaker and the audience.
High frequencies, unlike bass frequencies, are extremely directional and any
obstacle will involve attenuation in their response.
