8
4.
Place the bracket in position, after first passing the line and the loudspeaker
cable through the square hole on the bracket. Fix the bracket to the wall.
Connect the loudspeaker cable to the connector on the rear part of the box, using
the Euroblock connector supplied. Ensure the correct polarity of the terminals
and that the cable goes through the square hole in the bracket. It is advisable to
place the protective housing supplied when the loudspeaker is installed
outdoors.
5.
Place the acoustic box in its final position, vertically sliding it downward so that
the rail on its rear side fits with the bracket rail. Fasten the safety cable on the
rear part of the acoustic box, to avoid it accidentally falling and causing material
and/or personal damage.
6.
Orientate the box to obtain the required position on the vertical and horizontal
axes. Tighten the Allen screws on the bracket to fix said position on both axes.
7.
Adjust the power selector to the required position.
