7
INSTALLATION
Step 1:
measure the mounting hole. It must be as the
cut-out size of the device. Pass the cable through the
cable gland. Follow steps A, B & C.
Step 2:
loose the metal plates and rise them up to
the top. Insert the back can into the mounting hole.
Step 3:
slide down the metal plates until they reach
the surface. Tight the fasteners inside the back can.
Step 4:
follow step D. Then connect the audio cable to
the loudspeaker’s terminal block. Finally, insert the
mounting springs into the hooks and push the
loudspeaker into the back can.
