background image

 

 

3.

 

IMPORTANT NOTE 

Thank you for choosing our 

music projector eCMP8 / eCMP12

!. 

It  is 

VERY  IMPORTANT

  to  carefully  read  this  manual  and  to  fully  understand  its 

contents  before  any  connection  in  order  to  maximize  your  use  and  get  the  best 
performance from this equipment. 

To ensure optimal operation of this device, we strongly recommend that its maintenance 
be carried out by our authorised Technical Services. 

The Ecler 

eCMP8/ eCMP12

 come with a 

3

 years warranty. 

4.

 

INTRODUCTION 

The 

eCMP8

 is a music projector in a compact, high-efficiency format. It has an 8" low 

frequency transducer and a 1.4" coaxial high frequency transducer offering a power of 
150W @ 8 Ω. It also incorporates a 70/100 V line transformer with power options of 
37,5 / 75 / 150 W (these power options are halved in the case of a 70V line). 

It  has  been  designed  for  indoor  and  outdoor  applications  (water  and  sun  degraded 
resistant) where high power and precise coverage is required (100⁰x100⁰ dispersion). 

The 

eCMP12

 is a music projector in a compact, high-efficiency format. It has an 12" low 

frequency transducer and a 1.7" coaxial high frequency transducer offering a power of 
300W @ 8 Ω. It also incorporates a 70/100 V line transformer with power options of 
50/100/200 W (these power options are halved in the case of a 70V line). 

It  has  been  designed  for  indoor  and  outdoor  applications  (water  and  sun  degraded 
resistant) where high power and precise coverage is required (80⁰x80⁰ dispersion). 

 

 

Summary of Contents for eCMP12











Reviews: