Eckman EKECS03, Instruction Manual

Page: 16 / 20

- 15 -
is always greater than the chain’s transmission links so that the latter do not touch the bottom.
Replace the bar if required.
The chainsaw should be periodically serviced to check the correct operation of the chain, chain
drive, motor and brake.
CAUTION: Water must never come into contact with the machine.
First time user
If you are not familiar with chainsaws and the felling of trees, it is recommended that you obtain
informed instructions in addition to reading this manual fully. We also recommend as a
minimum that you practice cutting logs in a saw-horse or log cradle
.
General inspection
Regularly check that all fixing screws, nuts and bolts etc are tight. They may vibrate loose over
time.
P
ower cord maintenance
If the supply cord gets damaged in any way and needs replacing, the task must be carried out
by the manufacturer, the manufacturer’s agent, or an authorized service centre in order to
avoid a safety hazard.
Storage
Clean the electric chain saw with a dry cloth, do not use aggressive cleaning fluids.
Replace the electric chain saw blade cover and store in a dry place. Do not store in hot, dry
boiler rooms or other damp places.
TROUBLESHOOTING
Motor does not run
No electricity
Check socket, cables and plugs.
Damaged cable: Have repaired by a
service agent.
Do not patch cables with insulation tape.
Damaged switch: Have repaired by a
service agent.
See section on chain brake.
Worn carbon brushes Carbon brushes need replacing.
Chain does not move Chain brake
Check the chain brake and release if
necessary.