Eckman Elite EKRM36, Instruction Manual

Page: 8 / 14

7
IF THE STARTER WIRE REQUIRES ATTACHING TO THE STARTER
HANDLE – PROCEED AS FOLLOWS:-
1.Using your fingers, gently pull the wire a little in order to aim the wire end
connector to the hole of the starter handle ,please see Fig A below:
FIG A
2.Insert the wire connector into the hole of the handle ,please see FIG B.
FIG B
3.Insert the wire connector into the hole of the handle completely till the wire cannot
drop out from the handle please see FIG C.
FIG C
4.Pull the starter handle to test if the wire is connecting onto the starter handle
well ,see FIG D.
FIG D