Software upgrade
Please be aware your decoder’s software may be automatically updated from time to time. This upgrade can only be done
when the decoder is in the standby mode. You will then be informed by a screen prompt that the new software version has
been found and that the upgrade will begin. If you wish to perform this upgrade manually you may do so by going to Menu
/ Installation / Decoder status / Upgrade decoder / Ok.
Connectivity Diagram
Front Panel
Smart Card
allows you to view
scrambled TV and Radio channels.
Gently push the card into the slot.
Its chip should face downwards and
the symbol of an arrow should face
inwards.
Indicator light:
Green - operating mode
Red - in standby, low power consumption.
The indicator light flickers when
yourdecoder is receiving signals from the
remote control.
DT 530 DIGITAL SET-TOP-BOX
3