Page 1 - 4
EchoStar International Corporation
© 2
0
04
Ech
o
S
ta
r I
n
te
rn
at
io
na
l
Co
rpor
a
tio
n
A
ll ri
gh
ts
re
serve
d
2.
U
NPACKING
2.1.
TO
UNPACK
YOUR
RECEIVER
:
When you unpack the contents of the box,
confirm that all the parts are included.
Unpack the contents of the box carefully.
Electronic equipment as receivers are easily
damaged when you handle it roughly. Examine
all parts for damage that may have occurred
during shipment. If you find any damage, stop to
unpack the box and call the shop where you
bought the receiver.
To help avoid possible damage to the receiver’s
electronics, allow the receiver to adapt to the
ambient temperature and humidity level. This to
avoid condensation.
2.2.
T
HE
CONTENTS
OF
THE
BOX
The box contains:
■
A receiver;
■
A loop-through cable;
■
A remote control unit (RCU);
■
A pair of batteries (for the RCU);
■
A set of documentation.
CAUTION
It is recommended to keep the packaging
materials for a period of time. In case of
warranty claims, we can request to return
the receiver in the original packaging to
protect the electronics. Failing to do so
might void the warranty.
WARNING
K
EEP
AWAY
THE
PLASTIC
PACKAGING
FROM
CHILDREN
. T
HE
PLASTIC
PACKAGING
MAY
CLING
TO
NOSE
AND
MOUTH
AND
PREVENT
BREATHING
.
3.
I
NSTALL
YOUR
RECEIVER
3.1.
G
UIDED
INSTALLATION
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. Make the required Language selections.
3. Make sure, the pre-programmed language
settings are convenient for you.
4. Press the Red key to advance.
5. Make the required Local time selections.
Note that GMT time is transmitted by the
satellite, EchoStar has no influence on this.
6. Press the Red key to advance.
7. Make the required User profile selections.
8. Press the Red key to advance.
WARNING
ALL
EQUIPMENT
INVOLVED
IN
THE
INSTALLATION
TASK
MUST
BE
INSTALLED
CORRECTLY
AND
SWITCHED
OFF
. M
AKE
SURE
THAT
IT
IS
SAFE
TO
PROCEED
WITH
THE
INSTALLATION
TASK
.
U
NSAFE
CIRCUITS
AND
INSTALLATIONS
CAN
CAUSE
(
SERIOUS
)
INJURY
OR
DAMAGE
TO
EQUIPMENT
.
CAUTION
Tighten the F-connectors only by hand. Do
not use any tools. You will damage the
connector pins if you overtighten the
connector. This will result in loss of signal
quality, or even total loss of reception.
NOTE
The loop-through configuration is pre-
programmed for a fixed dish installation with
a universal LNBF.
If you have another dish installation,
additional settings are required.
Q
UICK
REFERENCE
GUIDE
Make the required Language selections.
Make the required Local time selections.
Make the required User profile selections.
