EchoStar HUGHES inmarsat 9502, User Manual

Page: 51 / 77

Chapter 4 • Installation instructions
3500834-0001 Revision C
51
Terminal installation using the basic fix mount kit
(P/N 3004066-0002)
You may install the fixed mount on any structurally sound surface; either on a
horizontal, or vertical, or a sloped surface such as a roof or wall.
1. The pole has a 1.66” (4.2164cm) outer diameter (schedule 4 0 metal).
2. The pole mount is 2lbs/0.9Kg. The azimuth/elevation bracket is 1 lb/0.45Kg.
3. The wall mounting pattern has four bolts in a 6” x 3 ¾” (15.24cm x 9.525cm)
rectangle (not included). The holes are 0.325” diameter. See Figure 29 .
Figure 29: Base bracket hole pattern
The pole is shipped attached to the base bracket. Mount the base bracket of this
assembly to the structure with the appropriate hardware (not included). Consult
local building codes if needed. Once the base bracket is mounted, perform the
following steps (refer to
Figure 30 and Figure 31 ):
1. Insert the bubble level into the end of the pole (pipe) opposite the base
bracket. The bubble level fits inside the pole.