Section 4
Familiarization
Page 4 - 2
EchoStar DSB-808 2Ci Viaccess
©
2
001
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
1.2. THE RECEIVER REAR PANEL
The rear panel gives you various connections to connect the audio and video equipment as
well as a terrestrial and dish antennas. Depending on the installation setup, you may not use
all connectors, but they are provided for any desired setup in future.
The available connectors on the rear panel are:
■
The mains conenctor, for the conenction
to the mains power socket.
■
The
LNB IN
connector (F-type),
for the connection of a dish to the
receiver, to receive the digital
broadcasts;
■
The
SERIAL PORT
connector (sub-D),
for the connection to the serial
communication port of a PC;
■
The
IF OUT
connector (F-type), for a
loop through connection;
■
The
VIDEO
connector (RCA),
for the connection to the composite
video input of the TV (monitor);
■
The
ANT IN
connector (IEC),
for the connection of an terrestrial TV
antenna;
■
The
S/PDIF
connector (RCA),
for the connection of Dolby Digital (AC-3)
compatible audio equipment;
■
The
TV OUT
connector (IEC),
for the connection to the antenna
connector of a TV or a VCR;
■
The
AUDIO L
connector (RCA),
for the connection of the left audio input
channel of a stereo set;
■
The
VCR
connector (SCART), for the
connection of a VCR with the use of a
fully-featured SCART-cable;
■
The
AUDIO R
connector (RCA),
for the connection of the right audio input
channel of a stereo set;
■
The
TV
connector (SCART),
for the connection of a TV with the use of
a fully-featured SCART-cable;