EchoStar AD-3600 IP Viaccess User Manual Download Page 66

Page: 66 / 98

Section 7

Troubleshooting

Page 7 - 4

EchoStar AD-3600IP Viaccess

hoS

Int

nat

ion
a

por

ion

right

res
er

6. In a motorized

installation, the positioner
reacts unpredictable
which results in incorrect
positioning of the dish.

■

The cables used are
worn, damaged or
corroded.

■

Inspect the cable for
possible damage and
install new cable as
required.

■

The cable is incorrectly
finished or not sufficiently
shielded.

■

Use sufficiently shielded
and correctly finished
cables.

7. During (initial) setup of

the receiver, no channels
are found.

■

You did not select the
correct LNB(F).

■

On the receiver, in the
installation setup menu
select the correct LNB(F).

■

When installed, you have
selected the incorrect
switch type or port.

■

On the receiver, in the
installation setup menu
make the correct
selections.

■

You have selected the
incorrect satellite to
search channels on.

■

On the receiver, in the
installation setup menu
select the correct
satellite.

■

You have selected the
incorrect search method.

■

At an initial setup, always
choose the option All.

8. The signal indicator

shows one indicator
(only signal strength).

■

You have selected an
analog transponder

■

Select another (digital)
transponder.

Problem

Possible cause

What to do?

Summary of Contents for AD-3600 IP Viaccess































































































Search results

Summary of Contents for AD-3600 IP Viaccess

Reviews:

Brands by name

Popular brands

EchoStar AD-3600 IP Viaccess, User Manual

Search results

Summary of Contents for AD-3600 IP Viaccess

Reviews:

Brands by name

Popular brands