28
FLS
Platinum
Instruction Manual
FLS Platinum - Notes
5
FLS Platinum Instruction Manual
FLS Platinum Operating
Keypad Operation
-
Overview
Power Key:
Switches the unit on and off.
Menu Key:
Selects the menu which allows the user to modify the unit settings. See
the section
Changing the Unit Settings
for more information on the menu.
Up/Down Keys:
When in FLS Mode (sonar data displayed), changes the sonar range
up or down accordingly. When in the menu, the up and down arrows change the
selected option. See the section
Changing the Unit Settings
for more information on
the menu.
Mode Key:
Cycles between FLS mode, GPS mode and Test Mode. When in the
menu, the mode key returns the user to the current mode. See the relevant sections for
more information on each mode.
Page Key:
When in FLS mode, changes the information displayed in the information
bar at the bottom of the screen. See
FLS Mode
section for more information. When
in Test Mode, cycles through three test screens that will aid in testing the unit and
provide diagnostic information. See
Test Mode
section for more information. The
page key has no effect in GPS Mode. See
GPS Mode
section for more information.
Operating Modes
FLS Mode
FLS Mode is the sonar operating mode that displays the sonar image of the seabed
ahead and below the transducer. There are eight forward range settings (20m, 40m,
60m, 80m, 100m, 150m, 200m and Auto) that are selectable with the up and down
arrow keys. When the upper range is reached with the up arrow (200m), a further
press puts the unit onto the
‘
Auto
’
range. Similarly, when the lower range is reached
with the down arrow, a further press puts the unit onto the Auto range. A press of
either arrow key while Auto is on will switch the Auto off and the user will retain
manual control of the range.
When returning to manual range, the range selected will be the last range selected by
the Auto function until the user presses an arrow key to change range.
