A.
Connect the Micro-B end of the Vein
USB cable to the Linear probe box.
B.
Remove the backing from the 3M
Dual Lock™ strip on the probe box.
3
Attach the Linear probe box into the
bay by pressing it into place in the
position shown.
4
A.
Remove the grommet.
B.
Pull the Linear probe and cable
down through the grommet.
C.
Reinstall the grommet into position.
5
A.
Attach the flag label to the Linear
probe cable.
B.
Trim the excess cable tie.
6
Loosen the nuts of the tablet holder
and place the tablet into position.
Position the clamp to securely hold the
tablet, then tighten the nuts.
7
Feed the USB cable of the charger up
through the stem of the stand.
8
A
B
A
B
C
A
B