4
User Manual
MONITORS I
MON-7033-AHD-FB
W: EchomasterEurope.co.uk
T: +44(0)1420 487110
Operating Instructions
Power
The monitor has a last state memory function. If the monitor was in standby mode
when the Ignition supply was turned off, the monitor will turn on next time in
standby mode, if the monitor was
ON
when the Ignition supply was turned off, it
will power to ON when the Ignition supply is next applied. To turn the monitor ON
and OFF use the button.
Channel Selection
The monitor has 3 video input channels. These can be selected by pressing either
of the CH1, CH2 or CH3 buttons on the front panel.
The monitor also has 3 trigger input wires, if any of these wires receive a trigger
input, the channel corresponding will be selected. (please refer to wiring diagram
for wire colour and channel definition).
Menu Settings
To access the menu, press the ‘MENU’
button.
To cycle between the menu pages press the
‘MENU’ button once for each step until the
desired page is selected.
To select an item with that page first press
the
p
to select the first item, then to scroll
between each item press the CH1 button, the
active item will be highlighted green (as shown
in the image left), to change an item value use
the
p
and
q
buttons.
