2
User Manual
MONITORS I
MON-7010-TS
W: EchomasterEurope.co.uk
T: +44(0)1420 487110
Fitting Instructions
Introduction
Box Contents
Key Features
Thank you for purchasing your EchoMaster touchscreen automotive monitor.
This touchscreen monitor is designed to be used with EchoMaster DVR-50, DVR-150,
DVR-350 and DVR-580 devices. It has touchscreen capability for ease of use when
operating and setting up the listed DVR devices.
Please ensure you read and understand all aspects of this manual before fitting or using
your EchoMaster monitor.
u
Touchscreen Monitor
u
Mounting Bracket
u
User Manual
u
7” Touchscreen display
u
RS232 Interface for DVR Control
u
Rear Camera Input
u
Microphone Input
Choose a mounting location that will not obscure the drivers view.
Also, please ensure that the unit is not mounted in a location that will obstruct the operation
of any airbags.
If any mounting holes are to be drilled ensure that there are no wiring harnesses or
hoses/pipes located behind the panel before drilling.
If the cable passes through any metalwork then a suitable grommet and anti-rust
galvaniser should be utilised.
Mount the monitor bracket and run the cable behind the dash and wire up in accordance to
the wiring diagram provided on page 5.
Adjust the monitor viewing angle and secure with the supplied mounting bolts.
TC-MON-7010-TS,
adapter cable to allow touchscreen setup and control of DVR-50
and DVR-150 devices (this cable is not required with DVR-350 and DVR-580 devices).
Optional Extras
Supplied with MON-7010-TS-KIT
u
Bracket
u
Sunshade
u
Mic Harness
u
Mic
