3
MONITORS I
MM-4320
User Manual
W: EchomasterEurope.co.uk
T: +44(0)1420 487110
MONITORS I
MM-4320
Fitting Instructions
The MM-4320 will replace your factory fitted rearview mirror.
Remove the original mirror from the vehicle and replace with the MM-4320.
If your factory mounting bracket differs from the MM-4320 then there is a
supplied metal button that can be bonded to the windshield to allow the new
mirror to fit.
Once the unit is in place, you can run the connections cable across the
headliner of the vehicle and down the A pillar.
Please ensure that you do not impede the operation of any airbags that may
be located in the A pillar of the vehicle. Any cable passing these airbags
should be run behind the airbag and not in front of it.
Once the cable has been routed down to the dashboard, connect the camera
inputs and power connections as shown in the wiring diagram section of this
manual.
u
Factory replacement mirror
u
Dual video sensing inputs
u
Auto-dimming display
Operating Instructions
The screen will automatically turn on when it detects a signal input on
either channel.
If the signal input is on Video 1 then the picture can be turned off by pressing
the POWER button on the monitor. To turn it back on, press the button again.
If a video signal is detected on Video 2 then the screen will automatically
switch over to this channel. When Video 2 is being displayed, the monitor
cannot be turned off.
Video 2 has a brightness adjustment which is selectable by briefly pressing
the power button when a Video 2 image is being displayed.
The screen display will auto-dim in dark conditions so as not to distract
the driver.