6
7
email - [email protected]
tel - 866-931-8021
email - [email protected]
tel - 866-931-8021
POWER CONNECTION
STEP 2:
Insert the EchoMaster EFS-ODC power cable into the vehicle’s diagnostic
port firmly pressing to ensure a good connection.
CABLE ROUTING
STEP 3:
Route the EFS-ODC power cable up the driver’s side dashboard towards the
center of the windshield using the Trim stick provided in the kit and tuck the
extra wire into the dashboard and windshield seem.
STEP 4:
Route the power cable wire up the back of the windshield mount pressing
the cable into the groove in the bracket.
Attach the camera to the magnetic mount.
SETTING UP THE CAMERA
STEP 5:
Once everything is connected start the vehicle and allow it to run for 5
minutes allowing the Camera time to connect to the cellular network.
Connect to the EchoMaster fleet monitor website and confirm that you can
view the Live video stream feature NOTE: You must associate the device
with a vehicle within the EchoMaster fleet monitor website
Cellular
4G LTE
Bluetooth
Low Power 4.2
Audio
Stereo Mic / Mono Speaker
Languages
English
Power
12 - 14 Volts DC
Camera Resolution
1440p Exterior and 720p Interior
Auto Shut Off
72 hours with key off
Operating Temperatures
-4° F - 120° F
Internal Video Recording Time
120 Hours
SPECIFICATION CHART