Quick Start Guide
3
Email [email protected] (EU) - [email protected] (US)
www.echomaster.com
Fitting Instructions
When choosing a mounting location please ensure that there is sufficient access to the front door to allow
it to open.
Also ensure that there are no electrical or fluid lines behind any panels that are to be drilled that could
become punctured.
Once the mounting location has been decided secure the unit with 4 screws.
Connect the main power harness to +12V, IGN and Ground.
Make all camera connections before powering up the unit.
Connect and route the GPS antenna (DVR-50-G-AHD only) to a position where it has a clear an
unobstructed view of the sky. Any metalwork or large wiring looms above the antenna can obstruct
its operation.
Initial Set-up
Power the unit on with the door closed using the ignition.
Once it is powered up open the door and plug a mouse into the USB port.
Right click the mouse and then click on the icon.
Use the password ‘
admin’
and click
‘login’
.
You will now have access to all the various features and settings of the unit.
Once initial setup is complete: unplug the mouse, insert the SD card(s), close and lock the door and you
are ready to start using the product.
You will need to download the CEIBA software to a compatible PC to allow
playback. This can be downloaded from the following link:
http://echomaster.com/index.php?controller=attachment&id_attachment=660
You can also download the full Operating manual from the following location:
http://echomaster.com/index.php?controller=attachment&id_attachment=746
