6
Installation Guide
email - [email protected] (US)
tel - 1-800-477-2267
email - [email protected] (Europe)
Resolution
This changes the image quality of the recording. For full HD you should set this to
1080FHD. Other options available are 720P, WVGA and VGA
Loop Record
This option sets the recording segment time. This means that each segment of
recording will be the set length and then a new segment will be started. You can also
turn this off which will then set the unit to record a single video file until the SD card is
full at which point it will overwrite the SD card from the beginning.
HDR
Setting the HDR to ON (recommended) will provide a more vibrant image with more
defined colors.
Exposure
You can adjust the exposure of the lens to any of the following values;
+2.0, +5/3, +4/3, +1.0, +2/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Motion Detection
When this setting is turned on the camera will detect any movement within its view
and start recording automatically. The recording will stop 10 seconds after movement
stops. For this feature to work the camera must remain powered even if the vehicle is
ignition is turned off.
Record Audio
The unit records audio via the built-in microphone. This can be turned off by selecting
OFF in this menu.
Date Stamp
If switched on this feature will display the recording date and time on any recording.
If switched off this will not be shown (although it will still be displayed on screen)
G-Sensor
The unit has a built-in G-Sensor which, when triggered, will lock the current recording
file and prevent it from being overwritten. The sensitivity of this sensor can be
adjusted in this menu.
DC-27-G
Dash Camera with 2.7” Display & GPS
