email - [email protected]
tel - 866-931-8021
6
Installation Guide
PMON-7022-AHD
7” Dash Mount 2 Input AHD Monitor
Operating Instructions
Power
To turn the monitor ON and OFF use the POWER button. The monitor has a last
state memory function. If the monitor was in standby mode when the Ignition
supply was turned off, the monitor will turn on next time in standby mode, if the
monitor was ON when the Ignition supply was turned off, it will power to ON when
the Ignition supply is next applied.
Channel Selection
Press any of the CH buttons to view that image in full screen. Press the MODE
button to cycle through all multi-image view options. The monitor also has 2 trigger
input wires, if any of these wires receive a trigger input, the channel corresponding
will be selected. (Refer to wiring diagram for wire color and channel definition).
Audio
The audio from CH1 input will always be heard irrespective of which channel or
channels are being displayed on screen.
Menu Instructions
Press the MENU button to access the adjustable features of the monitor.
To cycle between the menu pages press the MENU Button.
To select an item press the
p
To scroll between each item, press the
CH1 Button, the active item will be highlighted green. To change an item
value, use the
p
and
q
buttons.
