Echola OS414-MM, Quick Installation Manual, Page: 4 / 14

4
Configuring
Configuring Configuring Configuring Dynamic Dynamic Dynamic Dynamic IP IP IP IP
If you have a DHCP server running on your network and you want to dynamically
assign an available IP address to OS414 then use following option.
# osctl osctl osctl osctl ----D D D D
Make sure you know the assigned IP address to login using “telnet” or “ssh”.
Configuring
Configuring Configuring
Configuring Hostname
Hostname Hostname
Hostname
You can also change the hostname of OS414 switch using “osctl”.
# osctl osctl osctl osctl – –– –h h h h OS414 OS414 OS414 OS414----SW SW SW SW----1 1 1 1
The above command changes hostname of OS414 to OS414-SW-1.
Configuring
Configuring Configuring
Configuring DNS/Nameserver
DNS/Nameserver DNS/Nameserver
DNS/Nameserver
To configure a DNS or Nameserver, you can use “-n” option of osctl.
# osct osct osct osctl l l l – –– –n n n n 192.168.1.11 192.168.1.11 192.168.1.11 192.168.1.11
Version Info
Version Info Version Info Version Info
The following command shows hardware and software versions and serial number
of the switch.
# osct osct osct osctl l l l – –– –v v v v
Other Administrative commands
Other Administrative commands Other Administrative commands Other Administrative commands
Most of other administrative functions can be done using standard Linux
commands. For example, to change the password use “
passwd
” command from the
Linux prompt and to add new user use “ useradd ” command. You have to be “root”
user in order to add a new user.