Configuration Manual
11
Install the E-ATC into the Back Box
Receptacle spacers are provided to help align the station and cover
flush against the wall in flush mount applications. The spacers are not
required when installing the station into a surface mount back box.
1.
Insert the station electronics and wiring into the back box.
2.
Use spacers as needed to provide a flush mounted station.
a.
Fold the spacer in a zig-zag fashion and press the stack
together to achieve the thickness needed to fill the gap
between the station, wall surface, and the back box.
b.
Cut off and discard the excess.
c.
Place the stack between the station electronics and the
flush mounted back box.
3.
Secure each station electronics in place using the two screws
provided. If using spacers, insert the screws through the spacers
as well.
4.
Secure the station in place using the four screws provided.
5.
Using a level, align the E-ATC perfectly square to the walls. If
the station is not installed level and flush, the faceplate will not
fit properly to the unit or against the wall. Refer to step 2 for
information regarding use of the provided spacers to mitigate
flush mount issues.
Summary of Contents for Elaho
Page 35: ...Configuration Manual 31...
