TOP PANEL
MIX CONTROL
Sets the amount of Echo effect added to the source sound.
Has a “click” feeling in the center to indicate the middle position.
Also has a built-in
LED
light to indicate on/off status of the pedal.
•
Set
MIX
to minimum (counter clockwise) to have a completely
dry sound and no echo.
•
Set
MIX
to maximum (clockwise) for a completely wet sound.
In this setting you will only hear the repetition of the echo with
a delay that is based on the position of the SPEED control.
EB Page 2
TIME CONTROL
Sets the frequency of the repetition.
This control will be disabled when an External Expression
Pedal (not included) is connected to the FXP input connector
located on the left panel.
FEEDBACK CONTROL
Sets the amount repetitions of the Echo.
Set this pot all the way (counter clockwise), to have
only one repetition.
If this pot is set to 75% and up you will get a regen
effect (the sound goes in a loop and will
progressively increase the volume and get
distorted)
TRUE BYPASS
FOOT SWITCH
Turns the pedal ON/OFF.
TAPE CONTROL
Emulates the effect of a vintage Tape Recorder
(Out of pitch and a slight noise) only on the
repetition of the Echo but not on the input
sound.
F-Pedals - PULSE OF REBELLION SERIES
EchoBandit
- User’s Guide
2016 F-Vision LLC © All Rights Reserved.
