ENGLISH
7
WHEELED TRIMMER
OPERATION
The OCT feature is used to trim in hard to reach places. This feature enables both the trimmer head and body to tilt for
trimming close to the ground. The degree of tilt is dependent on the setting selected on the height adjustment handle
located on the right side of the Wheeled Trimmer. To engage the OCT feature, simply move the handle into one of the
four settings that are available.
4.4 OFF CENTER TILT FEATURE (OCT)
1. Level:
The height adjustment handle is set in the
position closest to the rear of the trimmer.
2. 5.4 degrees:
The height adjustment handle is set in
the second position from the rear of the trimmer.
Figure 4.1, Level
Figure 4.2, Second Position
3. 10.3 degrees:
The height adjustment handle is set in
the third position from the rear of the trimmer.
4. 13 degrees:
The height adjustment handle is set in
the position closest to the front of the machine for
maximum tilt.
Figure 4.3, Third Position
Figure 4.4, Closest to Front
