30
C
D
E
All Models
3.
Use the wooden stick or brush to remove dirt from the cylinder
fins.
4.
Remove grass and leaves from the grid between the recoil starter
and fuel tank.
NOTE
On SRM-3100, 3110 Type 2E models only, when installing the
engine cover, be certain the tab of the metal deflector shield is in the
slot of the cover.
EXHAUST
SYSTEM
Spark Arrestor Screen
Level 2.
Tools Required:
Cross Head Screwdriver. Scrench. Soft metal brush.
Wooden carbon scraper. 3mm and 4mm Hex Wrench.
Parts Required:
Screen P/N 14590555730
Lid Gasket P/N 14586655730
SRM-3100, 3110 Type 2/2E
1A. Remove engine cover (A). See “Cleaning Cooling System” pages
29 & 30 for step by step instructions.