![background image](http://html1.mh-extra.com/html/echo/srm-3020t/srm-3020t_operators-manual_532843025.webp)
SRM-3020T
OPERATION
X7502350100
25
© 04/2018 ECHO Inc.
ENGLISH
1.
Stop Switch
Move stop switch button (A)
forward, away from the STOP
position.
2.
Choke
Move choke lever (B) to COLD
START (
) position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4.
Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grasp throttle handle and throttle trigger lockout with left hand and fully
depress throttle trigger to wide open position. Rapidly pull recoil starter
handle/rope (D) until engine fires (or maximum five [5] pulls).
5.
Choke
After engine fires (or 5 pulls),
move choke to the RUN (
)
(open) position. Firmly grasp
throttle handle and throttle
trigger lockout with left hand and
fully depress throttle trigger to
wide open position. Pull starter
handle/rope (D) until engine
starts and runs. Release throttle
trigger and allow unit to warm up at idle for several minutes.
Note: If engine does not start with choke in “RUN” position after 5
pulls, repeat instructions 2 - 5.
6.
Throttle Trigger
A
B
C
D