background image

ES-255

EMISSION CONTROL (EXHAUST / EVAPORATIVE)

X7531180307

9

© 07/2013 ECHO Inc.

• Do not use blower if any part is missing or damaged.

• Have repairs done only by an authorized ECHO Service dealer.

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects 
away from all openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a 
complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to 
unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible 
through openings.

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or 
leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. 
Have unit repaired by an authorized servicing dealer before using.

EMISSION CONTROL (EXHAUST / EVAPORATIVE)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (engine modification) 
and, if the second to last character of the Engine Family on the Emission 
Control Information label (sample below) is “C”, “K”, or “T”, the emission 
control system is EM and TWC (3-way catalyst). The fuel tank/fuel line 
emission control system is EVAP (evaporative emissions). Evaporative 
emissions for California models are only applicable to fuel tanks.

An Emission Control Label

 is located on the engine. (This is an 

EXAMPLE ONLY, information on label varies by engine FAMILY).

Product Emission Durability (Emission Compliance Period)

The 50 or 300 hour emission compliance period is the time span 
selected by the manufacturer certifying the engine emissions output 
meets applicable emissions regulations, provided that approved 
maintenance procedures are followed as listed in the Maintenance Section of this manual.

Summary of Contents for SHRED 'N' VAC ES-255





































Reviews: