HT235
OPERATION
X7712240502
21
© 06/22 ECHO Incorporated
1.
STOP Switch
Move STOP switch (A) to the
rear (towards the grip) to the “I”
or ON position.
2.
Choke
Move choke (B) to COLD
START (
) (closed) position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4.
Recoil Starter
Lay the unit on a flat, clear area.
Grip the support handle securely
with one hand, and pull the recoil
starter handle (D) until engine
fires (or 2-3 pulls maximum).
5.
Choke
After engine fires (or 2-3 pulls),
move choke (B) to the RUN (
)
(open) position. Restart engine if
necessary and allow unit to
warm up at idle for several
minutes.
Note: If engine does not start
with choke in “RUN”
position after 2-3 pulls,
repeat instructions 2 - 5.
A
B
C
D
B
