16
s
peCIfICaTIons
ProPaddle Attachment : Approved for use on PAS and SRM SB Models
Attachment Length ---------------------------------------- 927.1 mm (36.5 in.)
Attachment Width ----------------------------------------- 571.5 mm (22.5 in.)
Attachment Height ----------------------------------------- 266.7 mm (10.5 in.)
Weight ------------------------------------------------------- 5.09 kg. (11.22 lb.)
Drive Shaft --------------------------------------------------
6.35 mm (0.25 in.) Flex Shaft
Rotating Direction ----------------------------------------- Counterclockwise (viewed from operator's right side)
Paddle Diameter ------------------------------------------- 266.7 mm (10.5 in.)
Rubber Fins
------------------------------------------------- 571.5 mm (22.5 in.) W x 42 mm (1.65 in.) H x 12
Lubrication-------------------------------------------------- Drive Shaft - Lithium Base Grease
Gear Reduction Ratio ------------------------------------- 40 : 1
Sweeper Operating (RPM) ------------------------------- 200
Engine Wide Open Throttle (RPM) w/attachment ---- 7700 - 8500
Storage Hook Installation
9. Insert small end of hook into locating hole on attachment shaft.
10. Slide plastic cap onto end of attachment shaft.
8. Store ProPaddle components in a cool, dry place. Store gearcase/
lower driveshaft assembly with gearcase down to prevent lubricant
leakage from open shaft end.
IMPORTANT
DO NOT allow ProPaddle attachment to rest on paddle fins during
prolonged storage, or fins may become flattened.
