manualshive.com logo in svg

Echo Pro Attachment Series, Operator'S Manual, Page: 48 / 60

Share
Download
Echo Pro Attachment Series Operator'S Manual Download Page 48

DPAS-2100

99922238047

48

© 12/2022 ECHO Incorporated

TROUBLE SHOOTING

TROUBLE SHOOTING

Problem

Possible Cause

Solution

The machine 

does not 

start when 

you push 

the power 

switch.

No electrical contact 

between the machine 

and the battery.

1. Remove battery.
2. Check contact and install the battery 

again.

The battery is depleted. Charge the battery.
The lock-off lever switch 

and power switch are 

not pushed at the same 

time.

1. Push the lock-off lever switch and 

hold it.
2. Pull the  power switch to start the 

machine.

The machine 

stops when 

you cut.

The battery or machine 

is too hot.

1. Cool the battery until its func-tion 

returns to normal.
2. Cool the machine for approximately 

10 minutes.

The battery is 

disconnected from the 

tool.

Install the battery again.

The battery is depleted. Charge the battery.

Red Charger 

light flashes 

or does not 

light up.

Plug not connected to 

power outlet.

Plug in charger.

Battery pack not 

installed properly.

Check the battery installation.

Obstructed connection. Reinstall battery after removing 

obstructions.

Fault in the charger.

Consult your dealer.

Fault in the battery 

pack.

Consult your dealer.

Unit will not 

turn on

Battery pack not 

installed properly.

Check battery installation.

Unit does 

not run when 

turned on

Battery pack 

discharged.

Charge battery.

Battery pack outside 

acceptable temperature 

range.

Remove the battery and allow to cool.

Running time 

is too short.

Battery pack outside 

acceptable temperature 

range.

Remove battery and allow to cool.

Unit electronics too hot. Turn unit off and allow to cool.
Battery pack 

discharged.

Charge the battery.

Summary of Contents for Pro Attachment Series





























































Reviews:

No comments