manualshive.com logo in svg

Echo Pro Attachment PAS-225, Operator'S Manual

Share
Download
Echo Pro Attachment PAS-225 Operator'S Manual Download Page 14

14

8 Tooth Grass and Weed Blade 

is designed for grass, garden debris and 

thick weeds up to 19 mm (3/4”) diameter.  DO NOT use this blade for 

brush or heavy woody growth.

 

80 Tooth brush blade 

is designed for cutting brush and woody growth 

up to 13 mm  (1/2 in.) diameter.  

22 Tooth Clearing blade 

is designed for dense thickets and saplings 

up to 64 mm (2-1/2 in.) diameter.

Use Shoulder/Waist harness 

Use of the  Shoulder/Waist Harness is 

recommended for 

ALL

 Trimmer/Brush Cutter use. The Shoulder/Waist 

Harness suspends the trimmer from the operator's shoulder and reduces 

operator fatigue.

The restrictive harness enhances operator safety by reducing the pos-

sibility of blade contact with the operator's hands and feet.

Choosing the Correct Blade

Plastic/Nylon blades

 may be used where ever the nylon line head 

is used.  DO NOT use this blade for heavy weeds or brush!

  wArning 

The type of Blade used 

MUST

 be matched to the type and size of material cut.  An improper or dull blade can cause 

serious personal injury.  Blades 

MUST 

be sharp.  Dull blades increase the chance of kick out and injury to yourself 

and bystanders.

Summary of Contents for Pro Attachment PAS-225





































Reviews:

No comments

Brands by name

Popular brands

Load more brands