background image

13

DPAS-2100

99922205734

© 08/2021 ECHO Incorporated

Enviromentally Safe Battery Disposal

SAFETY

ITEM

TEMPERATURE

Power tool storage temperature range

32°F (0°C) - 113°F (45°C)

Power tool operation temperature range

32°F (0°C) - 113°F (45°C)

Battery charging temperature range

39°F (4°C) - 104°F (40°C)

Charger operation temperature range

39°F (4°C) - 104°F (40°C)

Battery storage temperature range

32°F (0°C) - 113°F (45°C)

Battery discharging temperature range

32°F (0°C) - 113°F (45°C)

The toxic and corrosive materials below are in the batteries used in this 

machine: Lithium-Ion, a toxic material.

Discard all toxic materials in a specified manner to prevent 

contamination of the environment. Before discarding damaged or worn 

out Li-ion battery, contact your local waste disposal agency, or the 

local Environmental Protection Agency for information and specific 

instructions. Take the batteries to a local recycling and/or disposal 

center, certified for lithium-ion disposal.

If the battery cracks or breaks, with or without leaks, do not recharge it 

and do not use. Discard it and replace with a new battery. DO NOT TRY 

TO REPAIR IT! 

To prevent injury and risk of fire, explosion, or electric shock, and to 

avoid damage to the environment:
Cover the terminals of the battery with heavy-duty adhesive tape.
DO NOT try to remove or destroy any of the battery components.
DO NOT try to open the battery.
If a leak develops, the released electrolytes are corrosive and toxic. DO 

NOT get the solution in the eyes or on skin, and do not swallow it.
DO NOT put these batteries in your regular household trash.
DO NOT incinerate.

DO NOT put them where they will become part of any waste landfill or 

municipal solid waste stream.

Take them to a certified recycling or disposal center.

The recommended ambient temperature range:

Summary of Contents for Pro Attachment DPAS-2100 Series





































Reviews: