![background image](http://html.mh-extra.com/html/echo/power-pruner-ppt-265s/power-pruner-ppt-265s_operators-manual_532498017.webp)
P
ower
P
runer
TM
o
PeraTor
'
s
M
anual
17
Automatic Oiling System
1. Wipe debris from around oil fill cap.
2. Remove oil fill cap and fill reservoir with a quality, low viscosity
guide bar and saw chain oil.
NOTE
The discharge volume of the automatic oiler is preset to deliver 3
to 4 cc/min. at normal operating RPM. During heavy or dry cutting
conditions the oil discharge volume may be adjusted to assure ad-
equate lubrication. Refill the oil reservoir with each tank of fuel.
IMPORTANT
To prevent plastic deterioration, do not use synthetic or silicone
based oil.
adJustInG
automatIc
oIler
Tools required:
Screwdriver
1. From bottom of gear case, turn adjustment screw (A) clockwise to
decrease oil volume - counter clockwise to increase oil volume.
NOTE
Very little visible oil on the saw chain will provide sufficient lubri
-
cation.
lubrIcatInG
the
GuIde
bar
and
saW
chaIn
A