Echo POWER PRUNER DPPT-2600H Operator'S Manual Download Page 41

Page: 41 / 52

DPPT-2600H

MAINTENANCE

X7508310101

Filing Standard Saw Chain

Level 2

Check bar part number on your Power Pruner. Chain and guide bar
gauge size must be identical. Use bar and chain combinations shown
in table above.

Dull or damaged cutters will result in poor cutting performance,
increased vibration, and premature saw chain failure.

Always stop unit and remove battery before servicing guide bar
and saw chain. Always wear gloves when filing saw chain,
otherwise serious personal injury may result.

Important points for proper maintenance of saw chain:

• Keep the cutters sharp at all times.

• Keep the left and the right cutters properly aligned.

Power Pruner

Bar and Chain Combinations

BAR P/N

CHAIN P/N

CHAIN

TYPE

LINKS PITCH

GAUGE

254 mm (10 in.)

narrow bar

P/N 10A4CD3246

80TXL46CQ

0.325 in.

0.043 in.

Tie Strap

Right Hand Cutter

Drive Link

Preset Tie Strap

Left Hand Cutter

Top Plate

Side Plate

Depth
Gauge

Guard
Link

Summary of Contents for POWER PRUNER DPPT-2600H





















































Search results

Summary of Contents for POWER PRUNER DPPT-2600H

Reviews:

Related manuals for POWER PRUNER DPPT-2600H

Brands by name

Popular brands

Echo POWER PRUNER DPPT-2600H, Operator'S Manual

Search results

Summary of Contents for POWER PRUNER DPPT-2600H

Reviews:

Related manuals for POWER PRUNER DPPT-2600H

Brands by name

Popular brands