DPPT-2600H
MAINTENANCE
X7508310101
39
© 01/24 ECHO Incorporated
Guide Bar and Saw Chain Replacement
Always remove battery before servicing guide bar and saw
chain. This saw chain is VERY sharp, wear heavy gloves to
protect your hands when handling it. Wear eye protection
meeting CE or ANSI specification Z87.1.
Guide Bar Replacement
Level 2.
1.
Remove two guide bar nuts (A)
and guide bar cover screw (B),
turn saw chain tension
adjustment screw (C)
counterclockwise to release
tension.
2.
Remove guide bar cover (D).
3.
Remove guide bar and saw
chain from gear case and
sprocket.
4.
Remove chain from guide bar
and check guide bar for
damage and excessive or uneven wear. Replace guide bar if necessary
5.
Install chain on guide bar with cutters on top of bar facing toward bar
tip.
6.
Install guide bar and chain on
gear case, engaging chain with
drive sprocket (E).
7.
Turn tension adjustment screw
(C) clockwise to take up slack
in saw chain.
8.
Install guide bar cover (D), and
tighten guide bar nuts finger
tight and install guide bar cover
screw (B).
9.
Adjust chain tension.
A
B
C
D
E
