2
CSG-670 TYPE1-E
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
WARNING
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•
Lead from lead-based paints,
•
Crystalline silica from bricks and cement and other masonry
products, and
•
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in a
well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic
particles.
INTRODUCTION
The ECHO model CSG-670 TYPE1-E Cut-off Saw
is a high-performance gasoline-powered tool
designed for use with a recommended 305 x 3.2 x
20 mm (12" x 1/8" x 25/32") abrasive wheel.
A water-flush attachment is available for dust
control.
Use only ECHO’s wheels or other wheels having a
minimum spindle speed rating of 6,000 r/min or
higher.
This manual provides the information necessary for
assembly, operation and maintenance of the cut-off
saw as well as the wheels available for it.
It is important that you follow this information
carefully.
WARNING
Improper use or care of this unit, or failure to
wear proper protection can result in serious
injury.
Read the rules for safe operation and
instructions in this manual. Wear eye and
hearing protection and a dust mask when
operating.
CONTENTS
Introduction ........................................... 2
Symbols and Signs ............................... 3
Description ............................................ 4
Definition of Terms ................................ 5
Operator Safety Precautions ................. 6
Preparing for Use .................................. 8
Abrasive Wheel Types and Uses .......... 10
Operation .............................................. 14
Troubleshooting Cutting Problems ........ 17
Troubleshooting Engine Problems ........ 17
Maintenance and Adjustment ................ 18
Storage after Use .................................. 23
Specifications ........................................ 23
Specifications, descriptions and illustrations in this manual were accurate at the time of publication, and
are subject to change without notice. Illustrations may include optional equipment and accessories, and
may not include all standard equipment.
© 2004, ECHO, Incorporated
