P
OWER
E
DGER
O
PERATOR
'
S
M
ANUAL
13
STARTING
COLD
ENGINE
WARNING
DANGER
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1.
Stop Switch
Move stop switch button (A) forward away from the STOP
position.
2.
Choke
Move choke lever (B) to Cold Start (
) Position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is visible in the "Clear" fuel return
line. Pump bulb an additional 4 or 5 times.
4.
Recoil Starter
Lay the unit on a flat clear area and pull the recoil starter handle (D)
until engine fires (maximum 5 pulls).
5.
Choke Lever
After engine fires, move choke lever to “Run” position (
) and
pull recoil starter handle/rope (D) until engine starts and runs.
Allow unit to warm up at idle for several minutes.
NOTE
If engine does not start with choke in “Run” position after 5 pulls,
repeat instructions 2-5.
6.
Throttle Trigger
After engine warm up, gradually depress throttle trigger to increase
engine RPM to operating speed.
B
C
D
A
D
Summary of Contents for PE-311
Page 25: ...POWER EDGER OPERATOR S MANUAL 25 NOTES...
Page 26: ...26 NOTES...