![background image](http://html1.mh-extra.com/html/echo/pe-231/pe-231_operators-manual_4015248021.webp)
P
OWER
E
DGER
O
PERATOR
'
S
M
ANUAL
21
STARTING
WARM
ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
WARNING
DANGER
When engine starts, the cutting attachment may rotate even with
the throttle trigger in idle (released) position.
1.
Stop Switch - Start/Run. Move stop switch button (A) away from
the STOP position.
2.
Primer - Pump Bulb. Pump primer bulb (C) until fuel is visible in the
"Clear" fuel return line. Pump bulb an additional 4 or 5 times.
3.
Start - Pull Rope. Lay the edger on a flat clear area and pull
the recoil starter handle (D) until the engine fires.
A
C
PE-261
C
PE-231
D