background image

18

Engine operation

Starting a warm engine

The starting procedure is the same as Cold Start except DO 
NOT close the choke.

1.

Throttle Position Lever

Move throttle position lever to idle position. 

2.

Purge Bulb

Pump purge bulb until fuel is visible. Pump purge bulb an ad-
ditional 4 or 5 times.

3.

Recoil Starter

Place the blower on a flat, clear area. Hold the blower firmly
with left hand and pull out the starter grip gently at first, and
rapidly pull recoil starter handle/rope until engine fires. If en-
gine does not start after 5 pulls, use cold start procedures.

Stopping the engine

1.

Throttle position lever

Release throttle trigger. Move Throttle position lever forward
to idle position (first detent away from W.O.T. position) and al-
low engine to return to idle before shutting off engine.

2.

Throttle position lever

Move Throttle position lever all the way forward to 

(Stop)

position.

1. Throttle position lever

1. Purge bulb

1. Starter handle

1. Throttle position lever

 WARNING

If engine does not stop when Throttle position lever is 
moved to STOP position, close choke -

 position- to stall 

engine. Have your ECHO dealer repair stop switch before 
using blower again. 

Summary of Contents for PB-760LN































Reviews: