ASSEMBLY
PB-760LN
20
X7531125905
© 10/19 ECHO Incorporated
7.
Assemble straight pipe (J) onto
swivel pipe (C), until you feel light
resistance. Do not force
connection. Hold swivel pipe and
turn straight pipe clockwise,
engaging positive locking
channels, until connection is
firm. Do not force connection.
8.
Assemble straight pipe with
decal (K) to straight pipe (J) as in
step 8.
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two straight pipes and install
according to instructions 8 & 9.
PB-760 T
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.
Install Blower Pipes
1.
Assemble clamps (A) and (G)
onto both ends of flexible pipe
(B).
Note: Clamp with cable guide
loop (G) fits elbow end of
flexible pipe.
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower elbow.
2.
Assemble flexible pipe to elbow
(D) on blower. Position clamp
with cable guide loop (G) on
outside of flexible pipe and
tighten clamp.
Note: Hang handle freely from
blower to assure throttle
cable is not twisted before
installing handle (E).
C
J
K
G
G
B
A
D
G
