background image

3

P

OWER

 B

LOWER

O

PERATOR

'

S

 M

ANUAL

IMPORTANT
The enclosed message provides
information necessary for the
protection of the unit.

NOTE
This enclosed message provides tips
for use, care and maintenance of the
unit.

S

AFETY

MANUAL

 

SAFETY

 

SYMBOLS

 

AND

 

IMPORTANT

 

INFORMATION

IMPORTANT

NOTE

Throughout this manual and on the product itself, you will find safety
alerts and helpful, informational messages preceded by symbols or key
words.  The following is an explanation of those symbols and key
words and what they mean to you.

This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can lead
to serious personal injury to operator and bystanders.

The circle with the slash symbol means whatever is shown
within the circle is prohibited.

INTERNATIONAL

 

SYMBOLS

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and understand

Operator's Manual.

Fuel and oil mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Wear eyes, ears and

head protection

Emergency stop

Finger Severing

Carburetor adjustment

- Low speed mixture

Safety/Alert

Wear hand

protection. Use

two handed.

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

Wear slip

resistant foot

wear.

Ignition

ON/OFF

Primer bulb

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)

PERSONAL

 

CONDITION

 

AND

 

SAFETY

 

EQUIPMENT

WARNING  

  DANGER

Power Blower users risk injury to themselves and others if the power blower is used improperly or safety precautions
are not followed.  Proper clothing and safety gear must be worn when operating a blower.

Summary of Contents for PB-755H





























Reviews: