manualshive.com logo in svg

Echo PB-620, Operator'S Manual

Share
Download
Echo PB-620 Operator'S Manual Download Page 13

13

P

OWER

 B

LOWER

O

PERATOR

'

S

 M

ANUAL

2. Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.

3. Recoil Starter

Pull recoil starter handle (D) and engine should start.

NOTE
If engine does not start after 5 pulls, use cold start procedures.

D

C

STOPPING

 

ENGINE

1. Throttle Position/Stop Switch Button

Release throttle trigger. Move Throttle Position /Stop Switch Button
(A) forward to idle position (first detent away from stop position)
and allow engine to return to idle before shutting off engine.

2. Throttle Position/Stop Switch Button

Move Throttle Position /Stop Switch Button (A) all the way forward
to STOP position.

WARNING     

      DANGER

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.

OPERATING

 

BLOWER

WARNING     

      DANGER

Always wear safety glasses, hearing protection, a face filter mask,
and take all safety precautions, or serious personal injury may
result.
Do not point the blower pipe in the direction of people or pets.

Read the Safety Section carefully.

IMPORTANT
To avoid engine damage due to over-revving, do not block blower
pipe opening.

A

Summary of Contents for PB-620

























Reviews:

No comments

Brands by name

Popular brands

Load more brands