OPERATION
PB-255LN
24
X7501186403
© 07/22 ECHO Incorporated
6.
Choke
Move choke lever (C) to RUN
position and, if necessary, restart
engine.
Note: If engine does not start with
choke in RUN position
after 5 pulls, repeat
instructions 3 - 6.
7.
Throttle Position Lever
After engine starts, move throttle position lever to idle position, and allow
engine to warm up for 3 minutes before use.
8.
Throttle Trigger
After engine warms up, depress throttle trigger or move throttle position
lever to increase engine RPM to operating speed.
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke.
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Throttle Position Lever
Move throttle position lever (B)
midway between idle and full
throttle positions.
3.
Purge Bulb
Pump purge bulb (D) until fuel is
visible and flows freely in the clear
fuel tank return line.
C
B
A
D
