![background image](http://html.mh-extra.com/html/echo/pb-200/pb-200_operators-manual_531518012.webp)
12
A
B
E
STARTING
WARM
ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
1.
Stop Switch
Move stop switch button (A) away from the STOP position.
2.
Throttle Position
Move throttle position lever (B) midway between idle and full
throttle positions.
3.
Recoil Starter
Place the unit on a flat clear area. Firmly grasp throttle grip with
left hand and rapidly pull recoil starter handle/rope (E) until engine
fires.
IMPORTANT
Recoil starter: Use short pulls - only 1/2-2/3 of rope for starting.
Do not allow the rope to snap back in. Always hold the unit
firmly.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING
ENGINE
1.
Throttle Trigger/Throttle Position Lever
Release throttle trigger (F). Move throttle position lever (B)
forward to idle position and allow engine to return to idle before
shutting engine off.
2.
Stop Switch
Move stop switch (B) to "Stop" position.
WARNING
DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
A
F
B
Summary of Contents for PB-200
Page 22: ...22 NOTES ...
Page 23: ...23 POWER BLOWER OPERATOR S MANUAL NOTES ...
Page 46: ...22 REMARQUES ...
Page 47: ...23 SOUFFLANTE MANUEL D UTILISATION REMARQUES ...