8
Before you start
Before you start
Packing list
Assembly
Attachment shaft assembly
1. Set power head/shaft assembly on a level surface.
2. Pull locator pin (A) out, and turn anticlockwise 1/4 turn to
lockout position.
3. Remove cardboard spacer, if necessary.
The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.
1. Power head with upper drive shaft assembly
2. Operator's manual
3. Loop handle bracket (barrier bar)
4. Socket wrench
5. L-wrench
6. Shoulder harness
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Summary of Contents for PAS-2620ES
