background image

ECHO LIMITED WARRANTY STATEMENT FOR

SPRAYERS SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO'S RESPONSIBILITY

ECHO Incorporated’s Limited Warranty, provides to the original end user purchaser that this ECHO product is free from defects
in material and workmanship.  Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace
at ECHO’s discretion, any defective product free of charge at any authorized ECHO servicing dealer within listed below
application time periods, limitations and exclusions. 

THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS

SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL END USER PURCHASER ONLY, AND
IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS.

 Repair parts and accessories replaced under this warranty are

warranted only for the balance of the original unit or accessory warranty period. Any damage caused by improper use,
modifications, installation or maintenance is not covered by this warranty. All parts or products replaced under warranty become
the property of ECHO, Inc. For a list of Authorized ECHO Dealers refer to WWW.ECHO-USA.COM or call 

1-800-432-Echo.

OWNER’S RESPONSIBILITY

To ensure trouble free warranty coverage it is important that you register your Echo equipment on-line at WWW.ECHO-
USA.COM or by filling out the warranty registration card supplied with your unit. Registering your product confirms your warranty
coverage and provides a direct link if we find it necessary to contact you.  The owner shall demonstrate reasonable care and
use, and follow preventative maintenance and storage Instructions, as prescribed in the  Use & Care Manual. Should a product
difficulty occur, you must, at your expense, deliver or ship your ECHO unit to an authorized ECHO servicing dealer for warranty
repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been made.
For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate
an ECHO servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s
Warranty Statement, you can contact our Consumer Product Support Department at 1-800-432-ECHO or contact us through
the web at WWW.ECHO-USA.COM.

PRODUCT WARRANTY PERIOD
RESIDENTIAL APPLICATION
• 5 YEAR WARRANTY -

 All units for residential, or non-income producing use will be covered by this limited warranty for five

(5) years from date of purchase.

EXCEPTIONS:

• Damage caused by:
Failure to follow Use & Care Manual
• Failure to follow all chemical manufacturers’ instructions included on their label or elsewhere
• Failure to follow Storing/Maintaining Your Sprayer section in Use & Care manual
Use of powder based chemicals with or in a piston pump sprayer
Wear items including but not limited to: seals, gaskets, pistons, hoses, diaphragms, straps or any wear item. These items are
covered for 90 days from date of purchase.
Any mis-use of product is not covered including but not limited to:  using un-approved chemicals or parts, un-approved uses,
using damaged or missing units/parts during operation, or modifying your sprayer in any manner.

COMMERCIAL APPLICATION
• 2 YEAR WARRANTY -

 All units for commercial, institutional, agricultural, industrial, or income producing use will be covered

by this limited warranty for two (2) years from the date of purchase.

EXCEPTIONS:

• Failure to read and follow Use & Care Manual
• Failure to follow all chemical manufacturers’ instructions included on their label or elsewhere
• Failure to follow Storing/Maintaining Your Sprayer section in Use & Care Manual
Use of powder based chemicals with or in a piston pump sprayer
Wear items including but not limited to: seals, gaskets, pistons, hoses, diaphragms, straps or any wear item. These items are
covered for 30 days from date of purchase.
Any mis-use of product is not covered including but not limited to:  using un-approved chemicals or parts, un-approved uses,
using damaged or missing units/parts during operation, or modifying your sprayer in any manner.

RENTAL APPLICATION - 90 DAYS WARRANTY

• Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of
purchase except for any of the above listed EXCEPTIONS.

PURCHASED REPAIR PARTS AND ACCESSORIES

90-day residential or non-income producing warranty except for any one of the above listed EXCEPTIONS
• 30-day commercial, institutional, agricultural, industrial, income producing, or rental application warranty except for any one
of the above listed EXCEPTIONS

YOUR RECEIPT OF PURCHASE INCLUDING DATE, MODEL AND SERIAL NUMBER MUST BE MAINTAINED AND
PRESENTED TO AN AUTHORIZED ECHO SERVICING DEALER FOR WARRANTY SERVICE. PROOF OF PURCHASE
RESTS SOLELY WITH THE CUSTOMER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO YOU MAY ALSO HAVE OTHER
SPECIFIC LEGAL RIGHTS WHICH VARY FROM STATE TO STATE. THIS LIMITED WARRANTY IS GIVEN BY ECHO
INCORPORATED, 400 OAKWOOD RD., LAKE ZURICH, IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, INCLUDING ANY
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE AND ANY IMPLIED WARRANTY OF MERCHANTABILITY
OTHERWISE APPLICABLE TO THIS PRODUCT. ECHO AND ITS AFFILIATED COMPANIES SHALL NOT BE LIABLE FOR
ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST PROFITS. THERE ARE NO WARRANTIES
EXTENDED OTHER THAN AS PROVIDED HEREIN. THIS LIMITED WARRANTY MAY BE MODIFIED ONLY BY ECHO.

1F

UNE MAUVAISE UTILISATION OU NE PAS SUIVRE LES INSTRUCTIONS
PEUT ENTRAÎNER UNE DÉFAILLANCE DU PRODUIT OU DES BLESSURES.
POUR UTILISER CE PRODUIT SANS DANGER, VOUS DEVEZ LIRE ET SUIVRE
TOUTES LES INSTRUCTIONS AVANT L'UTILISATION.

RÈGLES D'UTILISATION SÉCURITAIRE

Avant d'assembler et de faire fonctionner votre pulvérisateur, lisez attentivement toutes les
instructions. Lorsque vous travaillez avec de l'équipement sous pression, vous devez toujours suivre
attentivement les précautions de sécurité, y compris :

•  NE JAMAIS pulvériser de matériaux inflammables ou de produits chimiques produisant du gaz

et de la pression.

•  TOUJOURS lire l'étiquette des produits chimiques avant de remplir le pulvérisateur car certains

produits chimiques peuvent être dangereux lorsqu'ils sont utilisés avec ce pulvérisateur.

•  TOUJOURS porter des lunettes, des gants, une chemise à manches longues, un pantalon long et

des chaussures protectrices entières lorsque vous pulvérisez. Avant toute réparation, nettoyez le
réservoir du pulvérisateur avec de l'eau en le remplissant et en pulvérisant l'eau dans un endroit
approprié à l'extérieur ou dans un contenant.

•  VÉRIFICATION PRÉ-UTILISATION : vérifier l'étanchéité de l'écrou du boyau pour s'assurer que

le boyau est bien fixé à l'assemblage d'arrêt. S'assurer que le boyau est bien fixé au réservoir en
resserrant la pince du boyau au besoin. Assurez-vous que tous les raccords de la buse et du tube
sont bien serrés. Assurez-vous que la large pince de la pompe est serrée. Insérez les 2 boulons
utilisés pour attache le levier de pompe à l'arbre de pompe sont serrés.

•  NE PAS laisser un pulvérisateur sous pression au soleil ou à un endroit situé près d'une source

de chaleur. La chaleur peut produire une accumulation de pression et le pulvérisateur risque de
s'enflammer ou d'exploser, entraînant des blessures ou la mort.

•  NE JAMAIS mettre le pulvérisateur sous pression par tout autre moyen que la pompe d'origine.

Toute surpression peut faire exploser le pulvérisateur et provoquer des blessures ou la mort.

•  NE PAS essayer de modifier ou réparer ce produit sauf avec les pièces originales du fabricant.

AVERTISSEMENT :

 Manipuler les pièces de laiton de ce produit vous exposera  au

plomb, un produit chimique qui de l’avis de l’État de la Californie cause des
anomalies congénitales et d’autres problèmes reproductifs. 

Lavez-vous les mains

après toute manipulation.

REMARQUE : le réservoir et le boyau peuvent contenir de l'eau résiduelle suite au
test de qualité du pulvérisateur.

MISE EN GARDE!

       AVERTISSEMENT

Summary of Contents for MS-40BP














Reviews: