10
SPRAY
HOSE
Tools Required: Screwdriver
Parts Required:
Spray Hose Assembly
1. Release tank pressure and remove pump. Squeeze spray lever to
allow fluid in hose and spray gun to drain back into tank, and empty
tank.
2. Unscrew spray hose connector (A) from spray gun.
3. Loosen spray hose clamp (B) at base of unit, and remove hose from
tank outlet.
4. Attach new hose to outlet, and secure with hose clamp.
5. Screw hose connector to spray gun, and tighten securely.
6. Add water to tank, and test for leaks and proper operation before
adding spray solution.
ADJUSTABLE
NOZZLE
Tools Required: Screwdriver, small diameter wire.
Parts Required:
Nozzle Assembly or Nozzle O-ring Kit, Petroleum Jelly
1. Release tank pressure and remove pump. Squeeze spray lever to
allow fluid in hose and spray gun to drain back into tank, and empty
tank.
2. Unscrew nozzle tip (E) from wand.
3. Unscrew nozzle holder (G) and remove nozzle (C), and rubber washer
(F).
4. Check nozzle, nozzle o-ring (D), and rubber washer for damage, and
clean or replace parts as required. Lubricate o-ring (D) lightly with
petroleum jelly.
5. If plugged, nozzle (C) can be cleaned by inserting a small piece of wire
into the nozzle opening to clear buildup.
6. Reassemble parts in reverse order of removal.
7. Add water to tank, and test unit for leaks and proper operation before
adding spray solution.
A
C
F
D
G
E
B